4pcs 0.22F 5.5V Super Capacitor Pitch 5mm Button Capacitance Suitable for Truck Lighting Appliances Power Tools

Item Descriptions:-Product parameters: capacitance: 0.22F; voltage: 5.5V; spacing: 5.0mm, total length 17mm, diameter 11mm, thickness 4mm.-Applicability: This product is suitable for truck lighting appliances, power tools, electric toys, etc.-Note: Farad capacitors have fixed polarity and should be used at nominal voltage. They cannot be used in high-frequency charging and discharging circuits. The ambient temperature affects the life of the Farad capacitor. There is a voltage drop ?U-IR at the moment of discharge.-It cannot be stored in places with a relative humidity greater than 85% or containing toxic gases. It should be stored in an environment with a temperature of -30?~50? and a relative humidity of less than 60%.-When Farad capacitors are used on double-sided circuit boards, be careful not to pass through places where the capacitor can be touched. After installation, the capacitor cannot be twisted or tilted forcibly. Avoid overheating the capacitor during welding (1.6mm printed circuit boards should be welded at 260? for no more than 5s).-After welding, the circuit board and capacitors must be cleaned. When the Farad capacitors are used in series, there is a problem of voltage balance between the monomers.-Product list: Product include a total of 4pcs Supercapacitor, which can completely meet your daily use needs and replacement.Package:4 x SupercapacitorItem Specifications:Capacitance:0.22FVoltage:5.5VPitch:5.0mm

• Product parameters: capacitance: 0.22F; voltage: 5.5V; spacing: 5.0mm, total length 17mm, diameter 11mm, thickness 4mm.
• Applicability: This product is suitable for truck lighting appliances, power tools, electric toys, etc.
• Note: Farad capacitors have fixed polarity and should be used at nominal voltage. They cannot be used in high-frequency charging and discharging circuits. The ambient temperature affects the life of the Farad capacitor. There is a voltage drop ?U-IR at the moment of discharge.
• It cannot be stored in places with a relative humidity greater than 85% or containing toxic gases. It should be stored in an environment with a temperature of -30?~50? and a relative humidity of less than 60%.
• When Farad capacitors are used on double-sided circuit boards, be careful not to pass through places where the capacitor can be touched. After installation, the capacitor cannot be twisted or tilted forcibly. Avoid overheating the capacitor during welding (1.6mm printed circuit boards should be welded at 260? for no more than 5s).